Agilite K-Zero SF Plate Carrier Battle Bundle With BattleSteel Level RF2 / III+ Plate & Hanger

The Agilite K-Zero SF Plate Carrier Battle Bundle combines the K-Zero SF with the Pincer Multi-Caliber Triple Magazine Placard, Six Pack Hanger Pouch, and two BattleSteel 10x12 RF2 / III+ Special Threat Armor Plates for a complete plate carrier and armor setup. A BattleSteel Hang-Gear Heavy Duty Reversible Hanger is also included for storing the assembled carrier and attached equipment when not in use.

The K-Zero SF provides the modular carrier platform, while the Pincer Placard adds front-mounted magazine carriage and the Six Pack provides additional lower-front storage. The included BattleSteel plates are 10x12-inch Shooter's Cut, multi-curve ceramic/polyethylene armor plates tested to NIJ 0101.07 RF2 threat requirements.

Bundle Includes

• K-Zero SF Plate Carrier
• Pincer Placard Multicaliber
• Six Pack Hanger Pouch
• Two (2) BattleSteel level RF2/3+10x12 Special Threat Armor Plates
• FREE BattleSteel Hang-Gear Heavy Duty Reversible Hanger

Agilite K-Zero SF Plate Carrier

The K-Zero SF is a one-size modular plate carrier with one-size-fits-most plate bags for compatible Small, Medium, and Large armor plates. It includes the semi-rigid Micro Warfighter Cummerbund, two Duraflex side quick-release buckles, one Duraflex shoulder buckle, removable shoulder pads, integrated admin storage, cable management, vented inner plate bags, and a reinforced drag handle.

Pincer Multi-Caliber Placard

The included Pincer Placard provides a hook-backed triple-magazine front panel with structured polymer magwells designed to assist with one-handed magazine re-indexing. It supports compatible 5.56, 7.62x39, and PCC magazine configurations and includes placard attachment hardware.

Six Pack Hanger Pouch

The Six Pack adds 1.8 liters of accessible storage beneath the front of the plate carrier. It features two zippered compartments, internal organization, and integrated tourniquet retention without occupying the primary magazine placard area.

BattleSteel RF2 / III+ Armor Plates

The bundle includes two BattleSteel 10x12 Special Threat Armor Plates tested to NIJ Standard 0101.07 RF2, the protection category commonly referred to previously as Level III+. Each plate uses a silicon-carbide ceramic and polyethylene construction in a Shooter's Cut, multi-curve profile.

• Quantity: 2 plates
• Protection: NIJ 0101.07 RF2 / formerly Level III+
• Configuration: Stand-alone, multi-hit capable
• Tested Threats: 7.62x39mm 123 gr, 5.56mm M855 62 gr, and 7.62x51mm M80 149 gr
• Size: 10 x 12 in.
• Cut: Shooter's Cut
• Profile: Multi-curve
• Material: Silicon carbide ceramic and polyethylene
• Weight: 4.5 lb per plate
• Thickness: 0.9 in.
• Exterior: Polyurethane coating

Free BattleSteel Hang-Gear Hanger

A BattleSteel Hang-Gear Heavy Duty Reversible Hanger is included at no additional charge for storing the plate carrier and attached equipment when not in use.

Available Carrier Colors

• Multicam
• Ranger Green
• Black

Compatibility Note

This bundle includes the components listed above. Magazines, medical supplies, hydration equipment, and other accessories are not included unless specifically stated. Verify plate fit and carrier adjustment before use.

WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. You must be 18 or older to shop or purchase on our website, and 21 or older to purchase ammunition or firearms. Check local laws before ordering. By ordering, you certify that you meet all federal, state, and local legal requirements. There are no returns or exchanges on armor, firearms, ammunition, or PPE. Ammunition ships UPS Ground to the lower 48 states.
We reserve the right to correct critical errors.