Agilite Gen 2 Pincer Placard 3-Magazine Multi-Caliber Carrier

The Agilite Gen 2 Pincer Placard is a hook-backed multi-caliber magazine carrier designed to hold three compatible 5.56, 7.62x39, or PCC magazines. It can also be configured for six extended 9mm Glock magazines using the included magazine splitters.

Structured polymer magwells create a funneled opening that helps guide magazines back into the pouch for one-handed re-indexing. The placard maintains the low-profile characteristics of an elastic magazine carrier while giving the pouch opening additional structure.

The Pincer Placard includes both G-Hooks and polymer MOLLE placard buckles and features built-in ride-height adjustment for use with compatible plate carriers.

Key Features

• Multi-caliber triple magazine placard
• Holds three compatible 5.56 magazines
• Holds three compatible 7.62x39 magazines
• Holds three compatible PCC magazines
• Can accommodate six extended 9mm Glock magazines with the included splitters
• Includes 3 magazine splitters for PCC configurations
• Funneled polymer magwells assist with one-handed magazine re-indexing
• Hook-backed interface for placard-capable plate carriers
• Built-in ride-height adjustment
• Includes Mil-Spec G-Hooks
• Includes polymer MOLLE placard buckles
• Compatible with Agilite Jump Retention Tabs
• Laser-cut Squadron Mil-Spec laminate construction

Magazine Compatibility

The Pincer Placard supports three compatible 5.56, 7.62x39, or PCC magazines. Using the included splitters, it can also be configured to carry six extended 9mm Glock magazines.

Magazine dimensions and curvature vary between manufacturers. Some non-5.56 magazines, particularly certain 7.62x39 designs, may fit more tightly than standard AR-style magazines.

Plate Carrier Compatibility

The Pincer Placard attaches to compatible plate carriers and other platforms with a placard interface and appropriate loop surface. Both G-Hooks and polymer MOLLE placard buckles are included, providing multiple attachment options for compatible carrier setups.

Built-in height adjustment allows the placard position to be configured around the plate carrier and attachment system.

Specifications

• Manufacturer: Agilite
• Model: Gen 2 Pincer Placard Multi-Caliber Triple Mag Pouch
• Product Family: 8038.1
• Capacity: 3 compatible 5.56, 7.62x39, or PCC magazines; or 6 extended 9mm Glock magazines
• Dimensions: 9.8 x 3.5 in. (25 x 9 cm)
• Weight: 5.6 oz. (161 g)
• Mounting: Hook-backed placard interface
• Magwells: Structured polymer
• Material: Laser-cut Squadron Mil-Spec laminate
• Included Hardware: Mil-Spec G-Hooks and polymer MOLLE placard buckles
• Included: 3 magazine splitters for PCC configurations
• Available Colors: Black, Ranger Green, Multicam

Compatibility Note

Magazine fit can vary based on body dimensions, curvature, and baseplate design. Agilite Jump Retention Tabs can be added when additional retention is desired. Magazines, Jump Retention Tabs, plate carrier, and other accessories are not included unless specifically stated.

WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. You must be 18 or older to shop or purchase on our website, and 21 or older to purchase ammunition or firearms. Check local laws before ordering. By ordering, you certify that you meet all federal, state, and local legal requirements. There are no returns or exchanges on armor, firearms, ammunition, or PPE. Ammunition ships UPS Ground to the lower 48 states.
We reserve the right to correct critical errors.