Agilite Sub-Zero Plate Carrier

The Agilite Sub-Zero Plate Carrier is a lightweight, low-profile carrier designed for streamlined armor setups where mobility and reduced bulk are priorities. It combines Medium or Large plate bags with a one-size modular elastic cummerbund, placard compatibility, integrated equipment storage, and vented interior surfaces.

The included elastic cummerbund features three equipment cells on each side that can accommodate compatible 5.56 and 7.62 magazines, radios, tourniquets, and similarly sized equipment. Two external MOLLE columns on each side provide additional mounting space for compatible pouches and accessories.

Agilite's V-shaped shoulder geometry distributes the carried load across multiple suspension points, while closed-cell shoulder padding adds support without substantially increasing the carrier's profile. Heat-release vented areas inside the plate bags help manage moisture during extended wear.

Key Features

• Lightweight, low-profile slick plate carrier design
• One-size modular elastic cummerbund included
• Three elastic equipment cells on each side of the cummerbund
• Cummerbund cells accommodate compatible 5.56 and 7.62 magazines, radios, tourniquets, and similar equipment
• Two external MOLLE columns on each side
• Cummerbund supports hook-and-loop flaps and compatible quick-release buckle configurations
• Placard-compatible carrier design
• Rear plate bag compatible with the Agilite MOLLE Placard and other suitable placards
• V-shaped shoulder geometry distributes load across multiple suspension points
• Integral closed-cell comfort foam
• Heat-release vented areas inside the plate bags
• 500D CORDURA Mil-Spec tactical nylon
• Laser-cut Squadron laminate

Modular Elastic Cummerbund

The Sub-Zero includes Agilite's one-size modular elastic cummerbund. Each side incorporates three elastic storage cells and two external MOLLE columns, allowing equipment to be carried directly in the cummerbund or mounted externally.

The cummerbund can be configured around hook-and-loop closures or compatible quick-release systems such as FirstSpear Tubes, depending on the selected hardware and carrier setup.

Plate Bag Sizing

The Sub-Zero uses a one-size cummerbund, while the plate bags are available in Medium and Large. Select the carrier size according to the dimensions of the armor plates rather than clothing size.

• Medium: Fits most 10x12-inch, SAPI Medium, and smaller compatible plates
• Large: Intended for SAPI Large and other larger plates within the supported dimensions

Agilite specifies compatibility with SAPI, Shooter's Cut, and Swimmer's Cut plates within the dimensional limits below.

Maximum Plate Dimensions

Specifications

• Manufacturer: Agilite
• Model: Sub-Zero Plate Carrier
• Product Code: 8057
• Plate Bag Sizes: Medium, Large
• Cummerbund: One-size modular elastic cummerbund
• Material: 500D CORDURA Mil-Spec tactical nylon
• Laminate: Laser-cut Squadron laminate
• Hardware: Proprietary Mil-Spec hardware
• Padding: Integral closed-cell comfort foam
• Weight: 1.26 lb (0.57 kg)
• Available Colors: Multicam, Ranger Green, Black

Compatibility Note

The Sub-Zero Plate Carrier is designed for compatible armor plates within the listed dimensional limits. Armor plates, placards, quick-release buckles, pouches, and other accessories are not included unless specifically stated.

WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. You must be 18 or older to shop or purchase on our website, and 21 or older to purchase ammunition or firearms. Check local laws before ordering. By ordering, you certify that you meet all federal, state, and local legal requirements. There are no returns or exchanges on armor, firearms, ammunition, or PPE. Ammunition ships UPS Ground to the lower 48 states.
We reserve the right to correct critical errors.