Overview
100% Made In USA
Max-Cuff can be kept in 3 different modes. Elongated Mode: bulk packed for easy case storage. Concealed Mode: can be easily carried in pocket, pouch, glove box, etc. Ready Mode: prethread the double loops and be ready for action! Available in white or UV protected black
The illustrations and information suggested in this training aid are subject to the standard operating procedures for applying restraints on subjects being placed into custody, transporting of subjects, etc., required of law enforcement personnel by their particular agency. MAX-CUFF is recommended to assist officers in cases where the subject may be bleeding and minimum contact is desired. The recently passed Occupational Safety and Health Administration's (OSHA) Occupational Exposure to BLOODBORNE PATHOGENS standards may apply to you and your agency. MAX-CUFF is effective as an all purpose restraint for hands, legs, arms, leg to hands as a hobble, and can easily be concealed. It is a tough nylon product, light in weight and can be applied quickly. It is made of a high tensile strength nylon that is superior to standard plastics. MAX-CUFF has been tested and proven to be a superior restraint. MAX-CUFF is a novel U.S. Patented product.
Features:
- Handcuff, Two Loops on one strap
- Effective all-purpose restraining for hands, feet, legs, arms
- Can be used as a Hobble
- Made of high tensile strength Nylon
- Meets military, police, and prison standards
- Can be preset to facilitate speedy application
- Double locking feature
- Double locking to prevent over tightening.
- ID tab for recording date, time, or who is making the arrest
- Concealable mode
- Multiple subject capacity
- Can be used as a hobble.
- Non-metal / undetectable
- Reduces contact with bleeding subjects
- Safety tip for double locking
- Double tooth in the lock for extra strength
- Prevents over-tightening
- Subjects unable to tighten cuffs on themselves
- Disposable when dealing with bleeding subjects
- Meets OSHA standards in dealing with blood-borne pathogens
- 1/2" wide
- Available in Black and White
- MADE IN USA
Specifications:
- Length: 34"
- Weight: 1oz
- Material: Nylon
- Tensile Strength: 8000 psi +/-
- Pull Strength: 500 lbs. when double locked
Performance Testing:
- Material tensile strength: 8000 psi
- Material heat deflection temp: @ 66psi. - 202 o degrees F.
- Material flex strength: 13,500 psi. (minimum).
- Melting point: 255/265 o degrees, minimum.
- Elongation: Notched 1/8" 17
- Flex: Module 2.3 minimum.
- Specific gravity: 1.05 - 1.10 (pos 125)
- Strength at locks (dble locked): Excess of 485 to 500 lbs pull.
- Teeth angle 22 o degrees: Deg. required to insure a solid hold.
Each lock must have a single trigger with two large teeth approximately 5/16" wide x 1/4" long x 1/8" ledge, which fits tightly into to the compatible atchet design of the strap. The teeth of each trigger must engage simultaneously into the straps notching.
