KZ Ultra Low Profile Single Slot M1913 Type Mount for HK G3/MP5

(23 reviews) Write a Review

Register/Log-In to view special pricing if available. Use Request Quote Button for RFQs, Bulk Discounts, Out-of-Stock, Regulated Products to Restricted States, or Tax-Exempt Sales.


Checkout does not allow to mix free shipping products with other Items, so checkout in separate carts or use the REQUEST QUOTE or QUOTE CART button in your shopping cart for free shipping consideration or special rates.

AIR Freight orders must be in by 12:PM PST to ship the same day.

0.10 LBS

Out Of Stock


Fits all HK MP5, MP5K variants. Ideal for use with the Aimpoint line of T-1/T2 & H-1/H2 type of optics. This mount is the lowest low profile mount available for use with the T1/T2 style of mounting system. This same mounting system is also found on many Aimpoint style red dots. In many cases you can get a co-witness with the iron sights using this mount. If you are using an Aimpoint T or H series this is the best mount you can get for the MP5 or MP5K series.

Works with Aimpoint T1/H1 & T/1/T2 style red dots such as the Vortex Viper, etc. Please note that the mount works with low profile mount only.

  • Color: Black
  • Height max: 23.5 mm
  • Length max: 84 mm
  • Length of top rail: 84 mm
  • Material: Aluminum
  • NATO Accessory Rails: 1
  • Part number: BT-10266
  • Treatment: Hartcoat anodized
  • Weight: 63 g
  • Width max: 40 mm

WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to You must be 18+ years old to shop and or purchase on our website and 21+ to purchase Ammunition/Firearms. Check local laws before ordering as you certify you are of legal age and satisfy all federal, state, and local legal/regulatory requirements. There are NO returns or exchanges on armor, firearms, ammunition, PPE equipment. Ammo ships UPS ground to the lower 48 states.
We reserve the right to fix any critical errors.

. .
View AllClose

Additional Information

Optics Mounts
View AllClose

23 Reviews

  • 5

    KZ MP5 Red Dot Mount

    Posted by Ramón on 29th Mar 2024

    Absolutely perfect! Super low profile that allows you to cowitness your irons, if that’s what you prefer. Seems very well built. Fit and finish are excellent. I could do without the large Botach logo on the leg. Overall very pleased.

  • 4

    Ultra low mount on MP5k

    Posted by Dave Chng on 8th Feb 2024

    got this to replace my Low mount given from the Turkish AP5k ( Mp5k) type weapon! mounted a Romeo 5 red dot and now it cowitness with the iron sights .. GREAT MOUNT... fit and finish perfect on the MP5k

  • 5


    Posted by SHOGUN on 12th Dec 2018

    I was not sure if this would work with my rifle. BOTACH was kind enough to let me try and attach the mount at the store... and it worked! I bought one right away. Awesome customer service!

  • 3


    Posted by Jacob C on 30th Oct 2018

    For the price you pay it's a good B&T copy. The screws weren't quite tall enough to make contact with the bottom lips. Had to shave a bit of material off to get it to fit in the mounting lug but that may be due to thick coating on my receiver. When I got it mounted and tightened the screws I notice tightening the rear right mount would just cause the leg to just bow out and bend. So I just tightened it enough to keep it level. Not as great as the B&T, but not as bad as ebay special. It's adequate.

  • 5

    Best low profile mount

    Posted by Andy L. on 20th Apr 2018

    I had purchased a similar mount by B&T a while back that appears to be discontinued. I like how low it sits and you can still cowitness with irons (Aimpoint Pro/M2). I am very pleased with this mount and would buy again.

  • 5

    Excellent product.

    Posted by TIO on 1st Feb 2018

    Super low mount. Perfect co-witness with a TRS-25 on my HK94.

  • 4

    Good fit. Works great and

    Posted by Craig H. on 24th Jan 2018

    Good fit. Works great and gets you full cowitness with a low aimpoint mount on the optic. Few annoying things are that it has large manufacturer writing engraved in white. Also won't fit with the kley Zion low qd mount. I found ways around those with a sharpie and a generic mount that came with a hollosun sight.

  • 4

    Perfect co-witness mount for DJG 89K

    Posted by Steve L. on 17th Jan 2018

    I have purchased many "low profile" mounts for my CA89 and DJG 89K but they are all too high for co-witness with Bushnell TRS-25. But this Kley-Zion mount provides the perfect co-witness. There are two negatives about this mount that I had to take away 1 star. The mounting screws are too short (0.5 in). I've purchased #6-32 x 3/4" steel socket cap screw and it was perfect. Also there are large manufacturing letter marking on the side of the mount which makes it ugly. I just use black touch up paint to cover the lettering. I had just purchased another one of this mount so I wouldn't have to share between the two weapons.

  • 5

    it does not fit on

    Posted by Andrew K. on 17th Dec 2017

    it does not fit on my cohaire ca94

  • 5

    Fit perfectly on a Coharie

    Posted by Glen H. on 11th Dec 2017

    Fit perfectly on a Coharie CA94 (MP5 clone), a little finicky to install but worth it.

View AllClose

©Copyright 2023 Botach®, Inc.

Register or Log-In to View Member Pricing if available. Use the Request Quote Button for RFQs, bulk discounts, out-of-stock items, Regulated Products to restricted states, or Tax-Exempt sales. Products marked FREE SHIPPING cannot be combined with other products in the same cart; Order Separately.