BattleSteel®
BattleSteel HK MP5/HK33/HK53 Low profile Mounts
Register/Log-In to view special pricing if available. Use Request Quote Button for RFQs, Bulk Discounts, Out-of-Stock, Regulated Products to Restricted States, or Tax-Exempt Sales.
Checkout does not allow to mix free shipping products with other Items, so checkout in separate carts or use the REQUEST QUOTE or QUOTE CART button in your shopping cart for free shipping consideration or special rates.
AIR Freight orders must be in by 12:PM PST to ship the same day.
- SKU:
- BattleSteel-HKM
- MPN:
- MP5M-A
- Weight:
- 0.20 LBS
Description
- 6061-T6 Aircraft Aluminum
- Type II, Clas III Hard Black Anodized
- 100% Made In USA
BattleSteel presents the HK MP5/HK33/HK53 Low Profile Mounts, the ultimate mounting solution designed specifically for HK MP5/HK33/HK53 firearms. These mounts offer an ultra-low profile, providing an absolute co-witness for all Aimpoint Micro and HoloSun Sights, as well as a lower 1/3 option for Trijicon MRO Sights. Compatible with all HK MP5/HK33/HK53 variants, this mount pairs perfectly with Aimpoint T-1/T2, H-1/H2, Trijicon MRO, and HoloSuns optics. Crafted from 6061-T6 Aircraft Aluminum and finished with Type II, Class III Hard Black Anodizing, these mounts are proudly made in the USA. Each purchase comes complete with four screws for easy installation. Elevate your firearm optics with BattleSteel's low-profile mount.
WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. You must be 18+ years old to shop and or purchase on our website and 21+ to purchase Ammunition/Firearms. Check local laws before ordering as you certify you are of legal age and satisfy all federal, state, and local legal/regulatory requirements. There are NO returns or exchanges on armor, firearms, ammunition, PPE equipment. Ammo ships UPS ground to the lower 48 states.
We reserve the right to fix any critical errors.
Additional Information
Type: |
Optics Mount |
Platform: |
Aimpoint |
Platform: |
HoloSun |
Platform: |
Trijicon MRO |
21 Reviews
-
Battlesteel mount
A very good and tight mount for C-93 mount. I would have kept the 4 mounting screws to use a standard hex key…. Was finding it difficult to find a properly sized hex key/star key to tighten…. No hex key came with the mount
-
BattleSteel-HKMAH (Aimpoint Micro/Holosun)
BattleSteel-HKMAH (Aimpoint Micro/Holosun) mount has the T2 base and it worked perfectly to get the Sig Romeo 5 to cowitness the iron sights. Do not get the picatinny mount as that mount puts the height of the red dot in an awkward place (on the top of the front sight hood).
-
Mp5 mount
Fits easy and tight. Great value and fast shipping
-
Battle steel HK Mounts
This product works as advertised. With it I was able to co-witness an Sig Sauer Romeo5 on a Century Arms AP5. I also bought this same mount to use on my Century Arms AP5-P and HK MP5 22. I’m awaiting receiving two additional Romeo’s to mount on those last two firearms. When mounting on the AP5 versions you will have to reverse the claws to that the beveled edge is opposed to the way in which the claws come preinstalled with the mount. This is likely due to slight differences in the size of the mounting lugs on the AP5 platform.
-
Battle steel pic mount
Mount clamped on to my MKE AP5 very solidly. I was able to mount a full size Holosun red dot, but the Holosun 407 with pic mount would not fit because of the lack of rail slots and the small rail cut out. So some optics won't work. The mount is very close to the cocking knob so you need to be careful when opening the ejection port that you don't smash your fingers. I filed the corners down on that side.
-
MP5 Mount
If you are looking for a mount that will cowitness your red dot sight, this is the one!
-
Very Low Mount!
This mount went on with no fitting required on to a Century AP5P, snugged right up with no slippage or cant. It’s low profile allowed me to mount a 30mm Red Dot in a low Vortex ring for a usable co-witness. If it had a little more of the dovetail slot and another picatinny notch, it would be nice, but it got it done for me, at a price I could afford!
-
BATTLE STEEL HK MOUNTS
The mount fit perfectly on my SP5K and allowed my Aimpoint Micro T2 to cowitness . Wished i have bought this mount also for my SP5
-
BATTLE STEEL HK MOUNTS
The mount fit perfectly on my SP5K and allowed my Aimpoint Micro T2 to cowitness . Wished i have bought this mount also for my SP5
-
Great for Sig Romeo 5
Mount allowed me to achieve absolute co-witness on my AP5-P
