Kley-Zion

Specifications: Available for Magpul 5.56mm PMags Or GI Type Aluminum. CNC Machined From Aircraft-Grade 6061 Aluminum Type II, class III hard anodized Steel Screw 100% MADE IN USA  

1000 CORDURA nylon Sling slrap  PALS/MOLLE platform on the back 100% Made in USA

1000 CORDURA nylon Sling slrap  PALS/MOLLE platform on the back 100% Made in USA

1000 CORDURA nylon Sling slrap  PALS/MOLLE platform on the back 100% Made in USA

Specifications: 6061 T6 Aluminium Billet Type II class III Hand Anodized Mounting screws included 100% Made In USA

The offset flashlight mount positions any light at the optimal position for tailcap activation with the offhand thumb. CNC Machined 6061 Aircraft Grade Aluminum Type II Class 3 Hard Black...

Compact accessory rail clamps directly to scope tube to provide mounting space for holographic sights, lasers, IR illuminators, flashlights, and other accessories that fit Picatinny style rails...

The Kley-Zion FDR Ring (Flashlight Defense & Rescue ) The Ultimate Flashlight retention & Rescue device. Compatible with all 1-inch diameter flashlights. Features &...

The Kley-Zion Magazine Chest Rig was designed as an alternative to the MCR6 Rapid Assault Chest Rig. Lighterweight without the extra webbing, H-Harness for better support. This chest rig is great for...

KZ Duty Belts

A single tool that can remove the carbon from both the bolt tail and bolt carrier with ease and precision. NEW Revolutionary Cork Screw Design makes carbon removal faster and more efficient than ever...

The Universal Wire Loop is one of the most versatile sling attachment points made.  A flexible nylon coated stainless steel wire allows for a sling attachment through eyelets, loops, slots, or...

The Universal Wire Loop is one of the most versatile sling attachment points made.  A flexible nylon coated stainless steel wire allows for a sling attachment through eyelets, loops, slots, or...

For All 1 Or 1.25 Inch Slings Converts Your Two-Point Sling Into A Single Point Sling. CNC Machined, 6061 Aircraft Aluminum Type II Class III Hard Anodized Ultra Lightweight 100% USA Made

For All 1 Or 1.25 Inch Slings Converts Your Two-Point Sling Into A Single Point Sling. CNC Machined, 6061 Aircraft Aluminum Type II Class III Hard Anodized Ultra Lightweight 100% USA Made

For All 1 Or 1.25 Inch Slings Converts Your Two-Point Sling Into A Single Point Sling. CNC Machined, 6061 Aircraft Aluminum Type II Class III Hard Anodized Ultra Lightweight 100% USA Made

The Kley-Zion Quick Adjust Low Profile Sling was designed be a one sling for all weapon systems. The secret is our Proprietary custom made slider, combined with our mil-spec heavy-duty 1.25" webbing,...

The KZ Res-Q Pen, fitted with our unique "Grab-Cap" changes the entire dynamics of deploying a tactical defense pen. The grab-cap protrudes from any place the pen is mounted for a quick draw for...

For 1-1/4" Slings. Featuring extremely tight machining tolerances and pull testing to over 300-pounds of pressure, this heavy-duty swivel set utilizes a non-glare manganese phosphate finish to...

Non-Reflective Manganese Phosphate Finish. For 1-1/4" Slings. Featuring extremely tight machining tolerances and pull testing to over 300-pounds of pressure, this heavy-duty swivel set utilizes a...

For 1.25" Slings, Quick Detach. The release buttons on this swivel set come flush to the swivel body, virtually eliminating the chance for errant release of the swivel. Featuring extremely...

The KZ Carbine Sling Mount installs on any M4-style carbine receiver extension, with no weapon disassembly required. It provides a perfect ambidextrous and rear facing anchor location for...

Made from 2-inch Mil-spec seat belt type webbing Holds Sixteen 40MM projectiles. Fully adjustable from 48" to 71" in length. Quick release buckle 100% Made in USA.

Replaces stock receiver end plate. Designed To Fit All / Type Rifles True ambidextrous weapon manipulation for left and right handed shooters. Will Accept All Types Of Webbing Or QD Hooks 4.5mm...

KZ's unique new dual sided camera mount allows you to mount a GoPro camera using the standard GoPro quick release mount or any type of camera which has a standard tripod 1/4 x 20 thread. Two piece...

The KZ T3 is designed and engineered for operators in high risk environments. This tool can be used for self defense as well as rescue. Mission adaptable: Spikes can be added or removed, as well as 7...

Single Point Sling Dual Bungee Construction HK style snap hook adapter covered w/ elastic tube Side-Release Buckle for Adapter Sling 1.25" Webbing, with 2 quick release buckles

A single tool that can remove the carbon from both the bolt tail and bolt carrier with ease and precision. NEW Revolutionary Cork Screw Design makes carbon removal faster and more efficient than ever...

The M14SCSB (Stripper Clip Sight Base) is a 1913 Picatinny Rail insert specifically designed for use on Mil-Spec M1/M14 rifles that are installed in a SAGE EBR Chassis Stock System...

Kit Includes: 5 Piece Rods Adaptor Dual-ended Nylon Brush Bore and Chamber Brushes Pick & Brush Set (4 picks in multiple shapes & sizes, 2 nylon-bristled brushes)

Milspec 1" Webbing 1.7 lbs 77" Long x 19" Wide 8 Adjustable Handles / Tie-Down Straps 100% MADE IN USA

One Sling Any Wepon System The Kley-Zion Quick Adjust Sling w/ Pull-TAP was designed be a one sling for all weapon systems. The secret is our Proprietary custom made slider, combined with our...

Kley-Zion Tactical Pistol Lanyard With Belt Loop Attachment is designed to meet the needs of tactical officers and soldiers. Secure your pistol to your belt or MOLLE system Quick detach release...

QD "Quick Detach" Sling Attachment Fits All Picatinny Rails Very Secure, No Movement Lightweight CNC Machined, 6061 Aircraft Grade Aluminum Type 2 Class III Hard coat Anodized. Lifetime...

Made of polypropylene webbed belting Bronze snap Self-locking aligator clip Perfect for use on ankles, knees and elbows. Hobble allows for transporting subjects in a seated, upright position, while...

Type a description for this product here...

The Kley-Zion Tactical Pen w/Handcuff Key & Tactical Point, fitted with our unique "Grab-Cap" changes the entire dynamics of deploying a tactical defense pen. The grab-cap protrudes from any...

1000 CORDURA nylon Sling slrap  PALS/MOLLE platform on the back 100% Made in USA

Compact, lightweight, and sleek. Low profile wallet with 3 card lots & 1 clear id pocket to allow the wallet to stay as slim as possible and constructed from the thinnest & lightest weight...

The Kley-Zion Slim Wallet is a lightweight, low profile, and low volume wallet. Card slots are purposely staggered to allow the wallet to stay as slim as possible and constructed from the...

Specifications: Tube: 7075 T6 Billet Aluminum Clamp: 6061 T6 Billet Aluminum 2-Shot Extension All Type II Class III Hard Anodized 3 QD Attachment Points 100% Made In USA  

The KZ Carbine Sling Mount installs on any M4-style carbine receiver extension, with no weapon disassembly required. It provides a perfect ambidextrous and rear facing anchor location for...

Protect Your expensive Tactical helmet during transportation with the KZ helmet bag.  

Material: 400 Denier X300 Denier Diamond Stock, Waterproof Material Pocket: 7"x3.75" 1" Wide Wooven Elastic w/Quick Relese Buckle Fits Waist Size Fron 25" To 50" Coil Zipper w/550 Zipper...

The Kley-Zion Wallet is designed for Law Enforcement & Military personnel who need lots of space, but still want a slim design to stay fast and light. What makes this wallet special is its unique...

Specially designed bayonet adaptor for the secure fitting of light & laser equipment, bipods & any Picatinny/Weaver Rail mounted device. Easy to fit. No Gunsmithing required. CNC machined...

The shafts are engineered from titanium, and they combine for an overall length of 30 inches. Importantly these shafts are sensitive enough to transmit even the slightest contact. The interchangeable...

The Kley-Zion Buffer Tube Buddy was designed for assembly and maintenance of the AR15/M4 lower receivers. Features/Specifications: Will work with both mil-spec & commercial buffer...

The new KZ Front Sight Tower Combo mount uses a rugged two piece design to achieve a rock solid platform for Lights or Lasers and provides QD Sling mounting points on either side of the sight tower...

The new KZ Front Sight Tower Combo mount uses a rugged two piece design to achieve a rock solid platform for Lights or Lasers and provides QD Sling mounting points on either side of the sight tower...

The Kley-Zion Quick Adjust Low Profile Sling was designed be a one sling for all weapon systems. The secret is our Proprietary custom made slider, combined with our mil-spec heavy-duty 1...

Specifications: Mil-Spec Gripper Webbing w/3 Latex Rubber Strips 50" Long Holds 50 12GA Shotshells Quick Relese Bukle 100% Made IN USA

With an aircraft grade aluminum body and a A2 Tool Steel diamond shaped tip, The KZ Res-Q Ring was designed to get you out of any mess. By inserting your middle finger through the ring and resting...

One Sling Any Weapon System The Kley-Zion Quick Adjust Low Profile Sling was designed be a one sling for all weapon systems. The secret is our Proprietary custom made...

The Kley-Zion Tourniquet Holder was specifically designed to allow personnel to place their C-A-T® or SOF Tourniquet on their vest or gear for rapid and easy access. It is made of 500D IR...

The ambidextrous tactical sling adapter is made for attaching various types of tactical slings. It allows mounting either web type slings or those that have “lobster claw” type clips. This phosphate...

We believe this system to be the the most stable shooting platform on the market.   System Includes: TSP Gun-Jaw with 6-Pad System 1913 Picatinny rail, With 2 Rapid Close/Open Butterfly...

[Desc]

Features: Made From Solid Billet 6061 T6 Aluminum. Type II, Class III Hard Coat Anodized, Matte Black Finish. Ergonomic Custom Steel Screw & Steel Locking Bar, Black Oxide Finished Bulid-In...

First of its kind, ambidextrous sling attachment designed for the Remington 870 Shotgun. CNC Machined, 7071 Aircraft Aluminum Type II Class III Hard Anodized Easy Installation, NO Gunsmithing Or...

For All Remington 870 & 1187 Shotgungs CNC Machined, 6061 Aircraft Aluminum Type II Class III Hard Anodized Easy Installation, NO Gunsmithing Or Modification Required Ultra...

Fits All Picatinny Rails Very Secure, No Movement Lightweight CNC Machined, 6061 Aircraft Grade Aluminum Type 2 Class III Hard coat Anodized Lifetime Warranty 100% US Made

Kley-Zion PRPOMOptical Mount

KZ Manfromtto Ball Head Universal Clamp

Quick release plate, designed to fit ball head adapters CNC Machined Aircraft Grade 6061 Aluminum Type II class III hard anodized Solid, durable construction Corrosion resistant Ambidextrous...

3 Sided Picatinny mounting Rail System. All rails are parallel to barrel. Designed to fit in the barrel cut (groove) of type rifles. Lightweight, Very Secure, No Movement Rotate to any...

Complete Model 15/16 Cleaning Kit with 5 piece rods (includes loop), adaptor, bronze bore brush, chamber brush, dual-ended nylon brush, oil bottle, and cleaning cloth Accessories are neatly stored...

Unique Low Profile Half Ring Design For 0.90-Inch Diameter Flashlights Designed To Grab Rail & Flashlight Simultaneously 6061 Aircraft Grade Aluminum CNC Machined Rail-Grabber Mounts To...

Low Profile Mount for co-witness with iron sights on HK MP5/K/SD/SP89 rifles and a red dot sight.

Features: Made From Solid Billet 6061 T6 Aluminum. Type II, Class III Hard Coat Anodized, Matte Black Finish. Ergonomic Custom Steel Screw & Steel Locking Bar, Black Oxide...

series red dot sights, without restricting your scope base and ring options. Short enough not to interfere with rings, turret, or scope objective. Rail mounts at any angle on the scope tube and...

Designed to grab rail & flashlight simultaneously 6061 Aircraft Grade Aluminum CNC Machined Rail-Grabber Mounts To Any Picatinny / Weaver Rail Type II Class 3 Hard Black Anodized Ultra...

Features: For 1.25-Inch Webbing Converts Your Two-Point Sling Into A Single Point Sling. CNC Machined, 6061 Aircraft Aluminum Type II Class III Hard Anodized, Red Ultra Lightweight 100% USA...

The Enhanced Trigger Guard is a drop in replacement for the / weapons platform.

These mounts are great when used with scopes, flashlights, lasers etc. Accessories are mounted at a 45 degree angle. When used with scopes the iron sights remain visible.

These mounts are great when used with scopes, flashlights, lasers etc. Accessories are mounted at a 45 degree angle. When used with scopes the iron sights remain visible.

Aircraft Grade 6061 CNC Machined Aluminum Ergonomic Design Heavy Duty, 1/16 Inch Stainless Steel Heat Treated Pocket Clip Type II, Class 3 Hard Anodized 5.6 Inches Long 1.7oz 100% MADE IN...

The Concertina Cutter is a lightweight, multi-purpose wire cutter whose compound leverage design enables one-handed cutting of heavy duty wire, including concertina wire, with 75 lbs. of grip force...

Features: Designed for the Colt 6940 Series Rifles. Picatinny Rail interfaces with the cavity of gas block and is secured with a back clamp. Mounts tactical light in the 12 o-clock position, No...

The Buttstock Adapter allows the operator to attach any of our 2 Point Slings (including the Long Range Sling) to a traditionally styled rifle stock.

Durable, tool steel scraper removes carbon buildup in / bolt carriers quickly and easily. Insert a section of your cleaning rod into the 7/32" hole to act as a T-Handle and turn; dual scraping edges...