Description
- 6061-T6 Aircraft Aluminum
- Type II, Clas III Hard Black Anodized
- 100% Made In USA
WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. You must be 18+ years old to shop and or purchase on our website and 21+ to purchase Ammunition/Firearms. Check local laws before ordering as you certify you are of legal age and satisfy all federal, state, and local legal/regulatory requirements. There are NO returns or exchanges on armor, firearms, ammunition, PPE equipment. Ammo ships UPS ground to the lower 48 states.
We reserve the right to fix any critical errors.
Additional Information
Type: |
Optics Mount |
Platform: |
Aimpoint |
Platform: |
HoloSun |
Platform: |
Trijicon MRO |
17 Reviews
-
Battle steel pic mount
Mount clamped on to my MKE AP5 very solidly. I was able to mount a full size Holosun red dot, but the Holosun 407 with pic mount would not fit because of the lack of rail slots and the small rail cut out. So some optics won't work. The mount is very close to the cocking knob so you need to be careful when opening the ejection port that you don't smash your fingers. I filed the corners down on that side.
-
MP5 Mount
If you are looking for a mount that will cowitness your red dot sight, this is the one!
-
Very Low Mount!
This mount went on with no fitting required on to a Century AP5P, snugged right up with no slippage or cant. It’s low profile allowed me to mount a 30mm Red Dot in a low Vortex ring for a usable co-witness. If it had a little more of the dovetail slot and another picatinny notch, it would be nice, but it got it done for me, at a price I could afford!
-
BATTLE STEEL HK MOUNTS
The mount fit perfectly on my SP5K and allowed my Aimpoint Micro T2 to cowitness . Wished i have bought this mount also for my SP5
-
BATTLE STEEL HK MOUNTS
The mount fit perfectly on my SP5K and allowed my Aimpoint Micro T2 to cowitness . Wished i have bought this mount also for my SP5
-
Great for Sig Romeo 5
Mount allowed me to achieve absolute co-witness on my AP5-P
-
Battle Steel HK Mounts
After trying several of the competitors, I found this mount to be by far the best. Good tight fit, very low for co-witness w/ a reddot. Highly recommend!
-
GREAT mount, cheesy logo
This is actually one of the best mounts you can purchase to achieve absolute co-witness with an Aimpoint Micro. One star deducted because of the awful logo etched on the side. Lose the logo and you have a first class product.
-
Perfect fit!
This mount worked perfect to mount my Holosun 503 to my SP5. With this mount it gives you a perfect co-witness. I highly recommend it!
-
Just what I needed.
This mount fit perfect for my MP5. It kept it low profile and it has a perfect co-witness. The dot is right above the front sight. It looks like it’s sitting on top of it. I couldn’t be happier with this purchase!