Atlas Bipods

The Atlas Accuracy International Spigot (AAIS) Part number BT19 is designed for use with the BT10-NC Atlas Bipod that mounts directly to the AAIS which plugs into the Accuracy International AI/AICS...

Atlas Bipod Pouch - Designed and manufactured for us by CSM Gear, the accessory pouch accommodates all models of the Atlas bipod and offers separate pockets for leg extensions and either or both sets...

Atlas Bipod Comparison Chart The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec...

Atlas Bipod Comparison Chart The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type...

BT35-LW17 5-H Atlas Bipod Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for...

Atlas Bipod Comparison Chart The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6...

Atlas Bipod Comparison Chart The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6...

Easily installed with the press of a stainless steel plunger, the cleats deliver a fully articulated aggressive foot to support the bipod. Available in black only. Weight 2.1 ounce.

Easily installed with the press of a stainless steel plunger, the skis deliver a fully articulated smooth foot to support the bipod. Available in black only. Weight 1.6 ounce.

Easily installed with the press of a stainless steel plunger, the Spikes deliver a singularly aggressive foot to support the bipod. The Spike portion is approximately 1...

The standard rubber feet for the Atlas Bipod per pair. Made in America. Available in black only, Weight 1 ounce.

B&T Accu-Shot BT21 Atlas TRG Bracket: The Atlas TRG Bracket (ATB) Part number BT21 – Is designed for use with the Sako TRG line of rifles utilizing the TRG bipod attachment slot. The ATB...

Tac-Cap. Optional steel cap replaces standard plastic cap found at bottom of knob. This cap can damage soft surfaces and is intended for units that will experience hard use. Friction-fit, no tools...

These replace one of the four Socket Button Head Cap Screws found on the Magpul Precision Rifle Stock (PRS) with a sling stud. The threaded straps that come standard with the PRS can be reversed...

Easily installed with the press of a stainless steel plunger they provide an additional 3 inches of elevation. Work with any of our three available feet. Available in black only. Weight 1.8 ounce.

When installed on your CAR collapsible stock allows any of our PRM style monopods to be installed. This is a great option for shooters that want the LOP adjustments available with a collapsible...

The Sako TRG Rail Kit comes complete and ready to install on your TRG stock. The kit allows for the installation of either the Accu-Shot BT12 or BT12-QK Precision Rail Monopods (BT12-QK is shown but...

The TUBE RAIL KIT, part number BT33 consists of a Steel Bar Nut that is designed to fit inside free float tubes and a low profile 1913 Picatinny rail 2.050" long with a 1.00 radius back and 1.602...

The new BT34 – 2.05" 1913 Rail has a center to center spacing of 1.6". Two Button head machine screws can be used (not included, seeBT1517) to attach this rail to the forearm of standard rifle...

The BT53 SILO is a novel and patent pending product that attaches by means of a Picatinny rail and provides; a textured front that can be pressed into barricades, Rubber side bars for...

The BT54 Flushcup Stud – Is a novel means to attach/detach accessories to a Picatinny rail if the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail...