Agilite SAPI Hydration Bladder

The Agilite SAPI Hydration Bladder is a 3-liter tactical hydration bladder with a 10 x 12-inch SAPI-shaped profile designed to make efficient use of the space behind a plate carrier. Its wider plate-shaped layout provides full 3-liter capacity while remaining well suited to low-profile rear carrier panels and hydration compartments.

The bladder is optimized for the Agilite Micro MAP Back Panel, which is designed around its shape and capacity. It can also be used with other compatible hydration carriers or compartments that can accommodate its 10 x 12-inch dimensions.

The bladder can be reversed for easier cleaning, incorporates antimicrobial properties, and is compatible with inline filtration systems. It is also BPA and PVC free and can be frozen or filled with warm water up to 140°F (60°C).

Key Features

• 3-liter hydration capacity
• SAPI-shaped profile designed for plate-carrier hydration setups
• Optimized for the Agilite Micro MAP Back Panel
• 10 x 12-inch dimensions
• Reversible design for easier cleaning
• Antimicrobial construction helps inhibit bacteria and mold growth
• Compatible with inline filtration systems
• Can be frozen
• Supports warm water up to 140°F (60°C)
• BPA free
• PVC free

Plate Carrier & Micro MAP Compatibility

The SAPI Hydration Bladder is specifically shaped for use with plate-carrier hydration systems and is optimized for the Agilite Micro MAP Back Panel. Its 10 x 12-inch profile allows the bladder to sit across a broader area than a conventional narrow hydration reservoir.

Other compatible hydration packs or carrier panels may also be used if they provide sufficient space for the bladder's dimensions and appropriate hose routing.

Cleaning & Water Compatibility

The bladder can be reversed to provide access to the interior for cleaning and drying. Agilite also specifies antimicrobial properties intended to help reduce bacteria and mold growth.

For temperature flexibility, the bladder can be frozen or filled with warm water up to a maximum temperature of 140°F (60°C).

Specifications

• Manufacturer: Agilite
• Model: SAPI Hydration Bladder
• Manufacturer SKU: 8080SMOKE3L
• Capacity: 3 liters
• Dimensions: 10 x 12 in.
• Shape: SAPI-style plate profile
• Filtration: Inline filtration compatible
• Cleaning: Reversible
• Material Safety: BPA and PVC free
• Maximum Warm Water Temperature: 140°F (60°C)
• Freezing: Compatible

Compatibility Note

The Agilite SAPI Hydration Bladder is optimized for the Agilite Micro MAP but may also fit other compatible hydration carriers that accommodate its 10 x 12-inch profile. The Micro MAP, plate carrier, filtration system, and other equipment are not included unless specifically stated.

WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. You must be 18 or older to shop or purchase on our website, and 21 or older to purchase ammunition or firearms. Check local laws before ordering. By ordering, you certify that you meet all federal, state, and local legal requirements. There are no returns or exchanges on armor, firearms, ammunition, or PPE. Ammunition ships UPS Ground to the lower 48 states.
We reserve the right to correct critical errors.