Toor Horizontal Carry Belt Loops

Our Horizontal Carry Belt Loops were designed to offer the user a practical lightweight horizontal mounting option and although it is meant for belts, we have seen it used on many types of gear.

The straps themselves are made from a heavy-duty rubber with attached directional fasteners, which are locking button-style mechanisms trusted by the US Military for airborne operations.

**Please be aware the Horizontal Carry Belt Loops do not fit the Field 1.0 & Field 2.0.**

Instructions:

1. To lock and release this directional fastener, first locate the locking tab on the female side of the button (it is a small deviation in the ring of the button).
2. When attaching the female side to the male side, make sure the opposing die of the locking tab is set in, then simply press down the rest of the button.
3. To release the mechanism, pull back the front of the button (closest to the edge of the strap) and it will easily release.

WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. You must be 18+ years old to shop and or purchase on our website and 21+ to purchase Ammunition/Firearms. Check local laws before ordering as you certify you are of legal age and satisfy all federal, state, and local legal/regulatory requirements. There are NO returns or exchanges on armor, firearms, ammunition, PPE equipment. Ammo ships UPS ground to the lower 48 states.
We reserve the right to fix any critical errors.