Frequently bought together:
Description
- Works on roll bars or roof top racks
- Securely holds Paddle Boards too
- Easy to install. No drilling
- Takes seconds to dismount or remount the kayak
- All hardware included
WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. You must be 18+ years old to shop and or purchase on our website and 21+ to purchase Ammunition/Firearms. Check local laws before ordering as you certify you are of legal age and satisfy all federal, state, and local legal/regulatory requirements. There are NO returns or exchanges on armor, firearms, ammunition, PPE equipment. Ammo ships UPS ground to the lower 48 states.
We reserve the right to fix any critical errors.
Related Products
Quick Fist 3" Clamp
Quick Fist
$10.95
• Holds objects from 2 3/4" to 3 1/4" (70mm to 83mm) in diameter.• Each clamp supports a safe working load of 50lbs (23 Kilos).• Mounts easily with one 1/4" (6mm) bolt or screw.• Mounting area: 4...
Quick Fist Rubber Tie Down Belt With Two Mounting Posts
Quick Fist
$14.95
Significantly Stronger, Wider & More Weather Resistant than Bungee Cord!
38"L x 1.5"W X .25"D (965x38x6mm) Belt that Secures Equipment
Not affected by hot or cold climates
UV resistant
Two...
Quick Fist Clamp
Quick Fist
$10.95
• Holds objects 1" to 2.25" (25 to 57mm) in diameter.• Each clamp supports a safe working load of 25lbs (11 kilos).• 2 clamps support 50lbs (23 kilos).• Mounts easily with one #10 bolt or screw.•...
Quick Fist Roll Bar Mount and Two Quick Fist Clamps
Quick Fist
$29.95
Use with the Included Original QUICK FIST clamp #10010 to mount a flashlight, shovel, axe, high lift jack or other tools from 1" to 2.25" (25 to 57mm) in diameter to a roll bar. The...
Quick Fist Long Arm Clamp
Quick Fist
$19.95
• Holds objects from 1/2" to 4.5" (13mm to 114mm) in diameter.• Each clamp supports a safe working load of 50lbs (23k). Break strength is 120lbs (55k).• Mounts easily with two 1/4" (6mm) bolts or #14...