null
Click to shop our other tactical stores:
BOTACH BATTLESTEEL PD BOTACH SURPLUS BOTACH
Osight

Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System

LOGIN IN TO SEE MEMBER PRICING IF AVAILABLE.

Use the "Request Quote" button below for quotes, bulk discounts, out-of-stock, regulated products, or tax-exempt sales.

SKU:
OSIGHT-SE-MOS
UPC:
6978095650384
MPN:
OSIGHT-SE-MOS
Weight:
0.20 LBS
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Removing the adapter plate eliminates one mechanical interface. That means fewer components to fit and torque, less tolerance stacking, and one fewer connection to manage under repeated recoil. The optic also sits closer to the slide. Without an exposed plate beneath the housing, the SE MOS creates a lower, more integrated profile that follows the familiar GLOCK MOS slide more closely.
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Direct mounting determines how the optic connects to the pistol. The enclosed housing helps protect the sighting system once the pistol enters everyday use. Dust, rain, sweat, clothing fibers, and range debris can collect around a carried optic. The SE MOS’s fully enclosed, sealed-emitter housing helps prevent their ingress, while the IPX7 rating supports use in wet conditions. Its rearward mounting position also helps reduce exposure to carbon buildup near the ejection port, keeping sightlines clear for longer. A CNC-machined 7075-T6 aluminum housing adds structural protection while maintaining an EDC-focused profile.
  • Once mounted and zeroed, a working optic should require minimal attention. The side-loading CR1632 battery can be replaced without removing the SE MOS from the slide, preserving the mounting setup and avoiding unnecessary re-zeroing. Motion activation turns the optic on when movement is detected and shuts it down after three minutes of inactivity. Brightness memory restores the previous setting, while a low-power indicator provides advance notice when battery voltage drops below 2.2 volts. Maximum runtime reaches 140,000 hours in Mode 3 with the 2 MOA dot only. The multi-reticle system offers a 2 MOA dot, a 32 MOA circle, or both together. The dot provides a finer aiming reference, while the circle creates a more prominent visual index. The aspherical lens and coating system support a clear, consistent sight picture across all three configurations.
  • Direct mounting allows the SE MOS to sit farther rearward than a plate-mounted configuration. This creates additional space around the ejection-port area while bringing the window closer to the shooter’s eye. The window remains 21 × 14 mm, but that shortened viewing distance results in a greater effective field of view.
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
  • Osight SE MOS Direct Mount Enclosed Emitter Red Dot Sight Multi-Reticle System
Price: $249.99
Current Stock: 9999
Frequently bought together:

Related Products

Out Of Stock
On Sale
Mepro MPO PRO-F Closed Emitter Reflex Sight Multi-Reticle Mepro MPO PRO-F Closed Emitter Reflex Sight Multi-Reticle
Quick view

Mepro MPO PRO-F Closed Emitter Reflex Sight Multi-Reticle

Meprolight

MSRP: $319.99
Sale Price: $249.98
Save:
Introducing the Mepro MPO Pro-F — an incredibly tough and durable enclosed optic system built to meet the rigorous demands of military and law enforcement operations. The Mepro MPO Pro-F represents a...

Description

 
 
“Optics-ready” does not always mean direct-ready. On many GLOCK® MOS setups, an enclosed optic requires an adapter plate between the sight and slide. That plate adds height, hardware, and another mechanical interface that must remain secure under recoil. The Osight SE MOS removes that layer. Its native interface mounts directly to compatible full-size GLOCK MOS slides without an adapter plate. This reduces the number of components and frees space above the slide, allowing the optic to sit farther rearward and the sighting system to ride lower over the bore.
 
Direct mounting allows the SE MOS to sit farther rearward than a plate-mounted configuration. This creates additional space around the ejection-port area while bringing the window closer to the shooter’s eye. The window remains 21 × 14 mm, but that shortened viewing distance results in a greater effective field of view.
 
Inside the SE MOS, the emitter sits above the primary lens plane, placing more of the LED assembly atop the surrounding structure. This limits its exposure to overhead and high-angle light, making the sight highly resistant to glare. MOS shooters accustomed to the added height and complexity of adapter plates will immediately notice the SE MOS’s low height over bore. Its window sits nearly flush with the slide, helping reduce mechanical offset at close range while supporting a more natural sight alignment farther out. The deck is also low enough to provide a usable co-witness with factory GLOCK sights.
 
Removing the adapter plate eliminates one mechanical interface. That means fewer components to fit and torque, less tolerance stacking, and one fewer connection to manage under repeated recoil. The optic also sits closer to the slide. Without an exposed plate beneath the housing, the SE MOS creates a lower, more integrated profile that follows the familiar GLOCK MOS slide more closely.
 
Direct mounting determines how the optic connects to the pistol. The enclosed housing helps protect the sighting system once the pistol enters everyday use. Dust, rain, sweat, clothing fibers, and range debris can collect around a carried optic. The SE MOS’s fully enclosed, sealed-emitter housing helps prevent their ingress, while the IPX7 rating supports use in wet conditions. Its rearward mounting position also helps reduce exposure to carbon buildup near the ejection port, keeping sightlines clear for longer. A CNC-machined 7075-T6 aluminum housing adds structural protection while maintaining an EDC-focused profile.
 
Once mounted and zeroed, a working optic should require minimal attention. The side-loading CR1632 battery can be replaced without removing the SE MOS from the slide, preserving the mounting setup and avoiding unnecessary re-zeroing.

Motion activation turns the optic on when movement is detected and shuts it down after three minutes of inactivity. Brightness memory restores the previous setting, while a low-power indicator provides advance notice when battery voltage drops below 2.2 volts. Maximum runtime reaches 140,000 hours in Mode 3 with the 2 MOA dot only.

The multi-reticle system offers a 2 MOA dot, a 32 MOA circle, or both together. The dot provides a finer aiming reference, while the circle creates a more prominent visual index. The aspherical lens and coating system support a clear, consistent sight picture across all three configurations.

The SE MOS is designed for shooters using compatible full-size GLOCK MOS pistols who want enclosed-emitter protection without an adapter plate. Its low deck and factory-sight compatibility make it particularly relevant to EDC, defensive, and training setups where a compact, straightforward mounting system matters. The SE MOS is best paired with Gen 5 GLOCK pistols across the full-size range, including models such as the G47 MOS, G17 MOS, and G19 MOS. Slimline models such as the G43X MOS use the RMSc footprint and should instead be paired with a compatible direct-mount optic such as the Osight S, K, or SE.

The Osight SE MOS isn't just the sum of its features. It's the result of careful, cohesive design that brings out the best in every Glock.

Its rearward position brings the window closer to the shooter. The inverted emitter keeps the optical system low. The native interface removes a layer between the housing and slide. Supporting that architecture are an enclosed design, selectable reticles, an aspherical lens, and a practical power system.

The result is not simply an SE with another footprint. It is an enclosed optic designed around the GlockMOS platform from the beginning.

 
Features:
  • Enclosed Emitter Optic with Direct MOS Slides Mount:The Osight SE MOS is the industry's-first enclosed emitter optic engineered with a direct MOS footprint, eliminating the need for adapter plates on compatible full-size GLOCK® MOS slides.
  • 2 MOA Dot & 32 MOA Circle: Switch between dot-and-circle, 2 MOA dot-only, or 32 MOA circle-only reticles for any shooting scenario. Enjoy sharp clarity and strong contrast for precise, confident aiming.
  • Side-Loading CR1632 Battery: Effortless battery replacement without removing the optic ensures hassle-free re-zeroing. A high-end CR1632 battery offers easy accessibility while maintaining steady performance. 
  • Aspherical Lens: The aspherical lens ensures zero distortion, parallax-free performance, and exceptional clarity for rapid, precise target acquisition.  
  • Motion Sensor Function: The Osight SE MOS powers on at the slightest movement, and powers down after 3 minutes of inactivity to conserve battery.

WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. You must be 18 or older to shop or purchase on our website, and 21 or older to purchase ammunition or firearms. Check local laws before ordering. By ordering, you certify that you meet all federal, state, and local legal requirements. There are no returns or exchanges on armor, firearms, ammunition, or PPE. Ammunition ships UPS Ground to the lower 48 states.
We reserve the right to correct critical errors.

. .
View AllClose

Videos

View AllClose

Additional Information

Type:
Reflex Sight
Reticle:
Red Dot
View AllClose