Strike Industries 1911 PX-04 CNC Pistol Grips (Sunrise Pattern, Matte Finish)

The POLYMER EXTREME (PX) series 1911 pistol grips are constructed of heat resistant, high impact, and high bending strength polymers. These grips are inspired by Ray Gorzyn who is an accomplished 1911 gunsmith with over 30+ years of experience and an active IPSC shooter. Hundreds of 1911 have been custom built and produced by Ray and are considered top of the line.

Note that our matte finish grips are a dull matte black and look more grey. Simply take some light silicone spray and magically they turn into a smooth jet black.

All our 1911 grips are conveniently pre-cut for ambi safeties.

The sunrise pattern gives these grips and your handgun a modern yet refined look. These grips are bead blasted and feature a subtle matte finish. The sunrise pattern is downright gorgeous and were inspired by the Japanese “Rising Sun Flag” or “旭日旗 (Kyokujitsu-ki)”.

Specifications (Based on the JIS K6911 standard)

• Thickness: 0.295" (0.749cm)
• Density: 1.42
• Water Absorption: 0.3%
• Molded Shrinkage: 0.7%-1.25%
• Heat Resistance:(2hr/'C): 200'C
• Impact Strength: 3.0-3.5 Kgf-cm/cm2
• Flexible Strength: 9.5 Kgf/mm2
• Tensile Strength: 5.6 Kgf/mm2
• Compressive Strength: 22.0 Kgf/mm2
• Isolation Resistance: 1x5^(8-9)Ω (ohm)
• Breakdown Voltage: 11.0Kv/mm

WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. You must be 18+ years old to shop and or purchase on our website and 21+ to purchase Ammunition/Firearms. Check local laws before ordering as you certify you are of legal age and satisfy all federal, state, and local legal/regulatory requirements. There are NO returns or exchanges on armor, firearms, ammunition, PPE equipment. Ammo ships UPS ground to the lower 48 states.
We reserve the right to fix any critical errors.