Agilite Pincer Placard .308 Triple Mag Pouch

The Agilite Pincer Placard .308 Triple Mag Pouch is a hook-backed plate carrier placard designed to carry three compatible .308 / 7.62x51mm or 6.8x51mm magazines. Structured polymer magwells create a funneled opening that helps guide magazines back into the pouch for one-handed re-indexing.

The placard includes both Mil-Spec G-Hooks and polymer MOLLE placard buckles, along with built-in height adjustment for positioning on compatible plate carriers. Its laser-cut Squadron laminate construction maintains a low-profile front magazine configuration while providing structure around the magazine openings.

Key Features

• Holds three compatible .308 / 7.62x51mm magazines
• Also supports compatible 6.8x51mm magazines
• Hook-backed placard interface
• Funneled polymer magwells assist with one-handed magazine re-indexing
• Built-in ride-height adjustment
• Includes Mil-Spec G-Hooks
• Includes polymer MOLLE placard buckles
• Compatible with placard-capable plate carriers and packs
• Compatible with Agilite Jump Retention Tabs for additional retention
• Laser-cut Squadron Mil-Spec laminate construction

Magazine Compatibility

The Pincer Placard .308 is designed for three compatible .308 / 7.62x51mm or 6.8x51mm magazines. Magazine dimensions, curvature, and baseplate designs can vary between manufacturers, so fit should be verified with non-standard magazine bodies.

Plate Carrier Compatibility

The placard attaches to compatible plate carriers and packs with a suitable placard interface and loop surface. Both G-Hooks and polymer MOLLE placard buckles are included, and the built-in height adjustment allows the mounting position to be tuned to the carrier setup.

Specifications

• Manufacturer: Agilite
• Model: Pincer Placard .308 Triple Mag Pouch
• Product Family: 8169
• Capacity: 3 compatible .308 / 7.62x51mm or 6.8x51mm magazines
• Hook-and-Loop Panel Dimensions: 10.6 x 5.1 in. (27 x 13 cm)
• Mounting: Hook-backed placard interface
• Magwells: Structured polymer
• Material: Laser-cut Squadron Mil-Spec laminate
• Included Hardware: Mil-Spec G-Hooks and polymer MOLLE placard buckles
• Additional Retention: Compatible with Agilite Jump Retention Tabs
• Available Colors: Multicam, Ranger Green, Black

Compatibility Note

Magazine fit can vary by manufacturer and magazine geometry. Magazines, Jump Retention Tabs, plate carrier, pack, and other accessories are not included unless specifically stated.

WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. You must be 18 or older to shop or purchase on our website, and 21 or older to purchase ammunition or firearms. Check local laws before ordering. By ordering, you certify that you meet all federal, state, and local legal requirements. There are no returns or exchanges on armor, firearms, ammunition, or PPE. Ammunition ships UPS Ground to the lower 48 states.
We reserve the right to correct critical errors.