Discreet Carry Concepts

3.90" OAL +/-.03" Width: .624" Features two inline slots to fit virtually any logical hole spacing used by holster makers while providing subtle ride height adjustment for the user. Inside...

3.41" OAL +/-.03" Width: .624" Features two inline slots to fit virtually any logical hole spacing used by holster makers while providing subtle ride height adjustment for the user. Inside...

3.25" OAL +/-.03" Width: .624" Two .188" mounting holes spaced at .500" Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket or behind the belt and out of sight. Nothing to be seen...

Standard Hole Spacing to fit popular holsters. 3.41" OAL +/-.03" Width: .624" .205" bottom hole and horizontal slot spaced at .600" Horizontal slot allows clip to be mounted on an angle 8°...

2.35" OAL +/-.03" Width: .624" Two .188" mounting holes spaced at .500" works with both GS6 eyelets and 8-32 screws. Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket or behind...

1.71" OAL +/-.03" Width: .624" .188” diameter mounting hole works with both GS6 eyelets and screws. Inside dimensional tolerances: +/-.03" Hardware not included. Designed to be used anywhere...

The Mod 3.1 aka "The JWB" came to life as a result of the needs of world class bladesmith and maker of quality hard use tools, J.W. Bensinger out of Vermont. He needed a high performance attachment...

3.41" OAL +/-.03" Width: .624" Fits over belts up to 1.5". .205" round hole and horizontal slot spaced at .600" Horizontal slot allows clip to be mounted on an angle 8° either direction. Inside...

2.89" OAL +/-.03" Width: .624" Features two inline slots to fit virtually any logical hole spacing used by holster makers while providing subtle ride height adjustment for the user. Inside...

2.75" OAL +/-.03" Width: .624" Two .188" mounting holes spaced at .500" Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket or behind the belt and out of sight. Nothing to be seen...

2.75" OAL +/-.03" Width: .624" Two .188" mounting holes spaced at .500" Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket or behind the belt and out of sight. Nothing to be seen...

The Monoblock is engineered to be mounted directly to the holster body or other solid surface. Recommended hardware configuration from top to bottom: Screw, steel washer, Monoblock clip, body of the...