Peak Beam Maxa Beam Searchlight

With a 12,000,000 CandlePower output and a range of over 3,500 meters, the Maxa Beam is the world’s most powerful handheld searchlight. The searchlight features a motorized beam width that allows the user to vary the beam from a 1° spot to a 40° flood with the press of a button as well as a strobe mode that turns the Maxa Beam into a disorienting non-lethal weapon.

Maxa Beam Searchlights have been battle-tested by all branches of the U.S. military since 1987. Domestic users include U.S. Customs and Border Protection, Department of Homeland Security (DHS), Federal Bureau of Investigation (FBI) and Drug Enforcement Agency (DEA).  Internationally, Maxa Beam Searchlights have been exported to more than sixty-five countries where the searchlights are utilized for security, surveillance and law enforcement applications.

Specifications:

• Output: 12,000,000 Peak Beam CandlePower (no maximum threshold; -10% minimum threshold)
• Range: 3,500 meters (1 lux on target)
• Lamp: 85 Watt Xenon Short Arc Lamp (field replaceable); instant hot/cold start and restrike
• Infrared Illumination Capability (IR Filter sold separately)
• Beam Width: 1° Spot to 40° Flood, Motorized
• Beam Intensity: 3 levels
• Strobe: User-adjustable frequency (1-31Hz) and duty cycle (3-63%)
• Battery: Sold Separately
• Input Power: 12VDC
• Operating Temperature: -15°C to +60°C
• Searchlight Body: Constructed of corrosion-resistant alodined and powder-coated Aluminum and impact-resistant PC/ABS
• Size: 11.2 in. long x 5.74 in. diameter; 3.2 lbs.

Included in the Box:

• (1) MBS-410 Maxa Beam Searchlight
• (1) TL-002 Focus Adjustment Tool
• (1) Operation Manual

Set-Up and Operation

• Locate searchlight, battery and power cable.
• Attach Searchlight to Battery by lining up the four feet of the searchlight over holes in top of battery. Lower the searchlight into the holes, then slide the searchlight towards the connector end of the battery until searchlight locks in place.
• Connect the Power Cord by attaching the cord’s female end to the searchlight’s 4-pin power connector and attaching the cord’s male end to the battery connector. To lock, rotate only the locking ring clockwise. All connections are keyed; never force connections.
• To Turn Searchlight On, press the red ON/OFF SWITCH. Searchlight starts on high power, holds setting for 2 seconds, then drops to normal power.
• To Adjust Beam Width, pull the black 4-WAY SWITCH back to increase beam width to flood. Push the 4-way switch forward to decrease beam width to spot.
• To Activate Strobe, rock and hold the 4-way switch to the left. The default setting is momentary strobe, which means that the searchlight will strobe when the 4-way switch is held to the left. Please consult the Operation Manual for instructions on how to program the left button function to continuous strobe or low beam mode.
• To Activate High Beam, rock and hold the 4-way switch to the right. The default setting is momentary high beam, which means that the searchlight will stay on high beam when the 4-way switch is held to the right. Please consult the Operation Manual for instructions on how to program the right button function to continuous high beam mode.
• To Attach a Filter, line up the three tabs on the filter with the slots on the front of the searchlight. Place filter over front of searchlight and turn filter counter-clockwise until fully seated. Filter will lock in place. Visit the Filters page to view available filter options.

Searchlight Programming
The Maxa Beam Searchlight’s default switch settings can be modified with simple programming sequences. Customizable switch settings include setting the right and left button functions to “continuous” high and strobe, setting the default beam width, setting spot and flood limits, and changing the frequency of the searchlight’s strobe. Please consult the Operation Manual for programming instructions.

WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. You must be 18+ years old to shop and or purchase on our website and 21+ to purchase Ammunition/Firearms. Check local laws before ordering as you certify you are of legal age and satisfy all federal, state, and local legal/regulatory requirements. There are NO returns or exchanges on armor, firearms, ammunition, PPE equipment. Ammo ships UPS ground to the lower 48 states.
We reserve the right to fix any critical errors.