3M SecureFit Safety Glasses SF630AS, Shade 3.0 IR Anti-scratch Lens   3M's innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer's...

3.90" OAL +/-.03" Width: .624" Two .188" mounting holes spaced at .500" work with both GS6 eyelets and screws. Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket or behind the belt and out of sight. Nothing to be seen extending below...

3.90" OAL +/-.03" Width: .624" Features two inline slots to fit virtually any logical hole spacing used by holster makers while providing subtle ride height adjustment for the user. Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket...

3.41" OAL +/-.03" Width: .624" Features two inline slots to fit virtually any logical hole spacing used by holster makers while providing subtle ride height adjustment for the user. Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket...

3.25" OAL +/-.03" Width: .624" Two .188" mounting holes spaced at .500" Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket or behind the belt and out of sight. Nothing to be seen extending below or over the belt. Standard DMG/Cu...

Standard Hole Spacing to fit popular holsters. 3.41" OAL +/-.03" Width: .624" .205" bottom hole and horizontal slot spaced at .600" Horizontal slot allows clip to be mounted on an angle 8° either direction. Inside dimensional tolerances: +/-...

2.35" OAL +/-.03" Width: .624" Two .188" mounting holes spaced at .500" works with both GS6 eyelets and 8-32 screws. Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket or behind the belt and out of sight. Nothing to be seen extending...

1.71" OAL +/-.03" Width: .624" .188” diameter mounting hole works with both GS6 eyelets and screws. Inside dimensional tolerances: +/-.03" Hardware not included. Designed to be used anywhere you need a low profile clip with a small footprint. Our...

The Mod 3.1 aka "The JWB" came to life as a result of the needs of world class bladesmith and maker of quality hard use tools, J.W. Bensinger out of Vermont. He needed a high performance attachment to work for his specific application, so he took one of...

3.41" OAL +/-.03" Width: .624" Fits over belts up to 1.5". .205" round hole and horizontal slot spaced at .600" Horizontal slot allows clip to be mounted on an angle 8° either direction. Inside dimensional tolerances: +/-.03" Hardware not included...

2.89" OAL +/-.03" Width: .624" Features two inline slots to fit virtually any logical hole spacing used by holster makers while providing subtle ride height adjustment for the user. Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket...

2.75" OAL +/-.03" Width: .624" Two .188" mounting holes spaced at .500" Inside dimensional tolerances: +/-.03" Designed to be worn on a pocket or behind the belt and out of sight. Nothing to be seen extending below or over the belt. .188” diameter...