3M Protective Coverall 4570 offers chemical hold out and mechanical strength for workers in environments with chemical exposure. The suit helps protect against hazardous dusts (Type 5), light liquid splashes (Type 6), low pressure liquid sprays (Type 4) and high pressure liquid jets (Type 3). It is also certified to offer protection against radioactive particles (EN 1073-2) and (EN 14126). This suit achieves the highest class performance on all tests in EN 14126 and passes ASTM F1670 and F1671 for helping to protect against biological contaminants.
A Versatile Protective Suit for many Applications:
3M Protective Coveralls are designed for use in industrial workplaces as a physical barrier to help prevent skin contact from liquid splashes and dust in certain work environments. The 3M Protective Coverall 4570 is typically used for the following applications:
- Chemical mixing and handling
- Chemical / oil spills and clean up
- Metal Refining
- Metal Etching
- Hazardous Waste Remediation
- Decontamination / Site Decommissioning
- Tank Cleaning
- Infective agents / Biological Hazards
- Handling Toxic Powders
High Performance Fabric:
3M Protective Coverall 4570 uses a 92gsm heavy-duty material blending a soft anti-static treated inner layer of spun bond fibers with multiple outer layers of a high performance polyethylene laminate to offer liquid protection. The fabric is a soft material that helps reduce the amount of distracting noise caused by movement.
Innovative Seam Technology:
To reduce entry points for contaminants, seams are first stitched to offer increased strength. Then the seams are overtaped with a clear heat applied 5-layer chemically protective tape as a barrier to hazardous dusts and high pressure liquid jets. The co-extruded clear tape offers a discreet appearance while offering protection.
Additional Protective and Convenience Features:
This personal protection equipment suit offers numerous features for worker protection and convenience. It comes with a three-panel hood design with a chin flap for a better fit. Two stormflaps combined with double color-coded zips create a double seal for added protection. Thumb loops deliver a secure fit during overhead work. Large ring-pulls give workers more control when opening and closing zippers while wearing gloves. An elastic waist is adhered with glue to minimize potential entry points of contaminants. Elasticated wrists and ankles enhance natural movement.
PPE selection should be: based on risk assessment by a competent person; with knowledgeable of the working conditions; with knowledge of the limitations of PPE. Customers should contact a safety professional if in doubt.
When Personal Protective Equipment (PPE) is Necessary:
The US Occupational Safety and Health Administration (OSHA) Personal Protective Equipment Standard (29 CFR 1910.132) requires employers to conduct a worksite assessment to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). When conducting an assessment to determine whether PPE is needed to help prevent skin contact from liquids, there are many factors to consider. Workers handling, dispensing, using, and transporting liquid materials may need skin coverage. The worksite assessment should evaluate each task taking into account such things as whether skin contact may occur, whether it is continuous or intermittent, the nature of the contact (i.e. immersion, pressurized or non-pressurized spray, splash, surface contact, etc), accidental or intentional contact, and duration of the exposure and whether the contaminant can be absorbed through the skin.
- Protective coverall helps protect against a range of chemical jets and sprays
- Heavy-duty fabric with a soft anti-static treated inner layer offers protection and convenience
- Stitched seams are sealed with a 5-layer chemically protective tape
- Two storm flaps create a double seal for extra protection
- Large thumb loops and zipper pulls offer convenience while wearing gloves
- 3 Panel Hood
- Chin flap
- Elastic waist
- Wrist and ankles
- Radioacrive particulate protection
- Taped seams
- Two storm flaps
- ASTM D 5733
- ASTM D2582
- ASTM D751 Section 18
- ASTM D751 Section 66
- ASTM F1670:2008
- ASTM F1671:2013
- ASTM F739
- Certified to European Standards to help protect against certain industrail hazards
WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. (California law requires this warning to be given to customers in the State of California.)
PayPal checkout is disabled for carts that contain products with restrictions due to PayPal's acceptable use policy.
If you wish to use PayPal for part of your order please use separate shopping carts.
In an effort to be more competitive, we are moving from our free shipping policy, to a weight & destination-based shipping charge.
Until now we have been padding the sale price of our products to cover the free shipping cost. You will see overall savings when purchasing a single product but even bigger savings when purchasing multiple products at the same time. This allows us to group & ship together, eliminating excessive shipping fees. Selected marked items will still qualify for free GROUND or 2 DAY AIR shipping.
We would very like to earn your business, so you can always use the RFQ/REQUEST QUOTE for quantity orders and products protected by manufacturers MAP pricing policies.
Sales Tax Exemptions: We are required to collect sales tax on your order except for the following states: Alaska, Arizona, Delaware, Florida, Kansas, Missouri, Montana, New Hampshire, Oregon, & Puerto Rico. Other exemptions: Federal agencies, holders of state sale tax exemption/resale certificates & international sale.
Our ordering system will not charge sales tax for the above exempt states, but if you are tax exempt for any other reason check the NO SALES TAX box in the order form, sales tax will be removed prior to final billing.